The Wax Assembler/dresser must be able to perform all operations and operate the equipment efficiently when assembling wax patterns. Assemble pattern per Engineering procedures. Inspect components before and after assembly for casting defect contributors. Visually check for broken corners, lugs, and missing pins. Wax dipseal mold after assembly per procedure as needed. Pe

Work safely under functional safety guidelines such as PPE and equipment interaction. Review shop traveler to verify that prior operations have been completed before starting process. Read shop traveler or blueprint to determine specified requirements, tolerances and sequences of operations for machine setup. Set up and operate numerical control machine tools that automat

Read and apply the Quality Engineering Specification (QES) to the visual inspection of a casting, using a scan pattern for the inspection. Indications are evaluated and a decision is made to accept or reject the casting based on the acceptance of the QES. Operate air powered tool to remove defects and/or rework castings. Grit blast parts in an enclosed grit blast cabinet,

The Quality Engineering Co Op performs Quality Engineering functions and assists the Quality Engineering team. Works with Lab Engineering staff on projects/tasks that support the Carson City plant and is responsible for reliability improvement, productivity improvement, and process development projects as assigned. RESPONSIBILITIES Assist the Engineering Team when needed.

Under general supervision, oversee and perform dip and stucco operations of wax patterns to produce shell molds. Inspect shell molds to ensure conformance to published specifications on technique cards approved by plant Quality Department. Essential Job Functions Follow established housekeeping and safety practices to maintain the quality of the work environment. Under ge

Clean out melt chambers, feed systems, D.P. wings, ingot can, and other furnace areas as assigned. Accept responsibility for setting up furnace chambers for production as assigned, including changing molds, feeders, shields, etc. Clean and maintain E.B. Furnace viewports, sample lock valves, sample taker, and swivel feed thru equipment to minimize the possibility of leaks

The Electrical Maintenance Supervisor plays a pivotal role in overseeing the daily management and execution of various maintenance activities, encompassing preventive, predictive, corrective, and emergent maintenance tasks. The successful candidate must possess a robust electrical background coupled with mechanical expertise and proficient computer skills. Responsible for

Check all tags for proper identification Remove test material and place in tray with mold tag for kevex check, run kevex unit when required Stamp heat number on casting for identification, record lot control as required Cut off castings, trim excess gating Lift and dump 30 gallon barrels containing molds Visually inspect work for obvious defects Record on a daily basis al

Snag grinding (manually and mechanically) Rough belt polishing Trim cutting gates Visually inspect work for obvious defects Record all work performed, check routing card for accuracy. Meet an acceptable level of performance and show proficient understanding of Engineering and Quality instructions. Perform other duties as are designated by the Supervisor. Maintain a positi

Operate various heat treat furnaces Mark proper heat treat identification on castings Visually inspect work for obvious defects Record all work performed, check routing card for accuracy. Meet an acceptable level of performance and show proficient understanding of Engineering and Quality instructions. Perform other duties as are designated by the Supervisor. Maintain a po

Responsible for safely programming and machining of complex metal components to meet customer's requirements; this may include meeting drawing/print specifications. MAIN DUTIES & ESSENTIAL JOB FUNCTIONS Use of CNC lathe/mill Use of cranes Use of measuring equipment, calipers, micrometers etc. BACKGROUND/EXPERIENCE Need at least 3 years' experience running medium to large

Under the direction of the IT Manager, develop and maintain computer programs, applications and scripts within the Plant's information systems. Develop and modify programs, applications, reports, and scripts based on defined specifications with some direct supervision. Troubleshoot program problems and failures, and work with functional departments to resolve issues. Prov

We're looking for a self starting Business Systems Analyst (US Citizen) with a minimum of 3 years' experience with Oracle or Infor ERP products and a minimum of 2 years' experience with software development, scripting, report creation or business decision support in a heavy industrial manufacturing environment. The Business Systems Analyst is a critical member of our IT t

to accurately set up castings for radiography. Essential Job Functions Checks routing or requests to determine x ray needs on parts. Reviews Technique Cards to determine setup requirements, including x ray techniques, part positions and Film/IP requirements based on Techniques Cards. Sets up additional radiographs of defect areas not covered by Technique Cards. Inspect co

The Dimensional Engineer position is responsible for Dimensional Engineering activities to support new product introduction, continuous improvement and manufacturing. Essential Functions Develops processes, defines controls, and institutes effective scrap elimination efforts on assigned parts. Maintain a high level of quality for product design. Write, issue, and continua